Wednesday, November 26, 2014
on the engine to the transmission)
Was leaking at the tranny. The gasket was half crushed instead of inserted in the pan. 1/2hr , $5 fix and no drips!
Winter is here... I spent about
An hour getting the top on for
The first time. The garage hoist made it "easy".
Theres about 24 (8 front and 8 each rear side) 1/4" bolts to tighten it down & 2 - 5/16" nuts at the rear hatch.
I used epdm foam seal stuck on the
front top and all around the sides.
I found that the passenger side windshield needed to be strapped forward about 1/2" to line up the holes, the drivers side went on no problem.